A sheet of papyrus is made from the stem of the plant. The outer rind is first stripped off, and the sticky fibrous inner pith is cut lengthwise into thin strips of about 40 cm long. The strips are then placed side by side on a hard surface, with their edges slightly overlapping, and then another layer of strips is laid on top at a right angle. The strips may have been soaked in water long enough for decomposition to begin, perhaps increasing adhesion, but this is not certain. While still moist, the two layers are hammered together, mashing the layers into a single sheet. The sheet is then dried under pressure. After drying, the sheet of papyrus is polished with some rounded object, possibly a stone. Shoes were also made out of papyrus.To form the long strip that a scroll required, a number of such sheets were united, placed so that all the horizontal fibres parallel with the roll's length were on one side, all the vertical fibres on the other.
Featured Products
Copyright 2007 Egypt2day. All rights reserved.